Home / Machines / DTF White-Ink Transfer Printers

Equipment · Apparel · PET film

DTF White-Ink Transfer Printers for Apparel

DTF prints a design onto PET film with white ink, applies hot-melt powder, then heat-presses the transfer onto the garment. No pre-treatment, no weeding and no plates, which makes short runs and personalisation profitable. It is the most common first machine for a garment-decoration shop.

Not sure this is the right line? Send me one photo of what you want to print on. I will tell you which machine fits — including when a cheaper one does.

Ask on WhatsApp Request a free sample

What this line is for

This line sits alongside the four UV families on the home page. I configure it against the material and output you actually run; model names and sizes are confirmed in the quote rather than assumed from a catalogue. If your work overlaps two lines, I will tell you which one earns its space first.

Typical jobs you can sell

T-shirts & hoodies

Full-colour prints on cotton, polyester and blends.

Caps, bags & aprons

Transfers onto items a flatbed press cannot hold.

Teamwear & events

Names and numbers in small batches with fast turnaround.

Promotional apparel

One-off and short-run orders without setup cost.

Labels & patches

Small-format transfers for branding and workwear.

What I need to know before quoting

Four answers are usually enough to narrow the configuration. No spec-sheet guessing.

Fabric mix

Cotton, polyester and blends behave differently under heat and washing.

Print width & shaker

Manual powdering is cheap to start and expensive to run at volume.

Daily transfer count

This decides whether an automated powder line pays for itself.

Wash-fastness expectation

Send me the standard you need to meet and I will test against it.

Straight answers

Can I start with one machine?

Yes. One machine to start, no MOQ. Most buyers add a second line once jobs pile up.

How long is delivery?

Standard models ship in 15–20 days after deposit. Customised configurations are confirmed in the quote, and I give you an exact date before you pay.

Warranty and support?

12-month warranty on the machine (printheads are consumables and excluded, as with every brand). Lifetime remote technical support.

Compliance documents and voltage?

Machines can be built for your local voltage and plug standard. Send me the list of documents your market requires and I will confirm, in writing, exactly what can be supplied for your model before you order.

Before you pay: test on your own material

We print your design on your material, film the whole run, and send the samples and video. You see adhesion, colour and real speed first. I also send a cost-per-piece sheet so you can judge payback with your local prices, not a supplier estimate.